1、Drill bits for dowel and bolts and cord.
鉆頭的銷子和螺栓和脊髓。

2、Fit a dowel pin here to keep the adjacent parts aligned.
在這里裝一個定位銷，是相鄰的兩個部件對準。

3、Splitting forces are higher and dowel action is greater with the use of large diameter bars.
剪切力較高，銷栓作用比大直徑鋼筋更有用。

4、Start by laying out the dowel locations every 6 in. to 8 in. along the joint.
先在要對接的邊上每隔6 ~ 8英寸畫一個圓榫定位標記。

5、Dowel pins need to be short to allow easier dis-assembly and assembly of the mould during use.
合銷必須足夠短，以便在使用中能更易于模具的拆卸和安裝。

6、I go to a place where a dowel splits off.
我爬到鐘頂端定位梢分開的地方。

7、The carpenter gauged the dowel with calipers.
那木匠用卡鉗估量暗榫。

8、Not all parts will receive dedicated dowel pin holes.
并非所有的部分將得到專門的柱銷孔。

9、The two dowel pins align the cap and base of the housing.
用兩個定位銷將座罩和軸承座基礎對準。

10、Tooling Plate: Standard dowel locating holes and accurately milled locating slots.
模具板：標準定位樁孔，定位準確磨槽。

11、Where possible screw and dowel hole clearance will be provided in the manifold.
只要可能，在分流式系統上應提供螺絲及合銷孔。

12、Tooling Plate: Easy access mounting, accurate dowel location, accepts shocks.
模具板：輕松訪問安裝，定位準確的木釘，接受沖擊。

13、Position drive plate on the crankshaft's dowel pin and press on to the crankshaft flange.
將傳動盤安放在曲軸的定位銷上，然后壓到曲軸法蘭上。

14、One four foot length of wooden dowel that fits inside the pipe.
一個四英尺長的木制樁相適應的管內。

15、Its unable to repair dowel crown because of its shorter root of tooth.
殘根太短，一般無法利用樁冠修復。

16、Objective To restore serious dental defects using reinforced fiber composite resin dowel cores.
目的利用加強纖維復合樹脂樁核修復牙體嚴重缺損。

17、Tooling Plate:Universal mounting pattern with standard dowel locating holes.
模具板：通用模式與標準安裝定位樁孔。

18、Tooling Plate: Universal mounting pattern with standard dowel locating holes.
模具板：通用模式與標準安裝定位樁孔。

dowel翻譯